Use the lsvdiskhostmap command to list the volumes to the host
mapping. These hosts specify volumes that are mapped to them; the volume is visible to these
hosts.
Syntax
lsvdiskhostmap [ -nohdr ] [ -delim delimiter ] { vdisk_id | vdisk_name }
Parameters
- -nohdr
- (Optional) By default, headings are displayed for each column
of data in a concise style view, and for each item of data in a detailed
style view. The -nohdr parameter suppresses the
display of these headings.
Note: If there is no data to be displayed,
headings are not displayed.
- -delim delimiter
- (Optional) By default in a concise view, all columns of data are space-separated. The width of
each column is set to the maximum width of each item of data. In a detailed view, each item of data
has its own row, and if the headers are displayed, the data is separated from the header by a space.
The -delim parameter overrides this behavior. Valid input for the
-delim parameter is a 1-byte character. If you enter -delim
: on the command line, the colon character (:) separates all items of data
in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data
is separated from its header by the specified delimiter.
- vdisk_id | vdisk_name
- (Required) Specifies the ID or name of the volume. The clustered system displays a list
of all the hosts to which this volume is mapped and the Small Computer System Interface
(SCSI) ID by which the volume is mapped.
Description
This command displays a list of host IDs and names. These hosts specify a volume that is mapped
to them; that is, the volume is visible to these hosts. The SCSI LUN ID is also displayed.
The SCSI LUN ID is the ID by which the volume is recognized by the host.
Determining the host that a volume is mapped to: List the hosts that this volume is mapped
to, by issuing the following command:
lsvdiskhostmap vdisk_id | vdisk_name
where
vdisk_id | vdisk_name is the name or ID of the
volume. A list is
displayed. Look for the host name or ID to determine which host this volume is mapped to. If no data
is displayed, the volume is not mapped to any hosts.
The command returns the following values:
- id
- Specifies the ID of the volume in the output for lsvdiskhostmap.
- name
- Specifies the name of the volume in the output for lsvdiskhostmap.
- SCSI_id
- Specifies the SCSI ID.
- host_id
- Specifies the ID of the host.
- host_name
- Specifies the name of the host.
- vdisk_UID
- Specifies the UID of the volume.
- IO_group_id
- Specifies the ID of the input/output (I/O) group in which the host volume mapping exists.
- IO_group_name
- Specifies the name of I/O group in which the host volume mapping exists.
- host_cluster_id
- Indicates the unique ID for a host system.
- host_cluster_name
- Indicates the unique name for a host system.
An invocation example
lsvdiskhostmap 0
The resulting output:
id name SCSI_id host_id host_name vdisk_UID IO_group_id IO_group_name hostcluster_id hostcluster_name
4 vdisk4 0 3 host3 UID4 0 iogrp0
6 priv_6 4 4 host4 UID6 0 iogrp0
8 shared_8 5 4 host4 UID8 0 iogrp0 0 hostcluster0
8 shared_8 5 5 host5 UID8 0 iogrp0 0 hostcluster0