lsarray

Use the lsarray command to list the array MDisks.

Syntax

lsarray [ -nohdr ] [ -delim delimiter ] [ -bytes ] [ -filtervalue? ] { [ -filtervalue attribute=value ] | [ -filtervalue capacity=value -unit { b | kb | mb | gb | tb | pb } ] } [ { mdisk_id | mdisk_name } ]

Parameters

-nohdr

(Optional) By default, headings are displayed for each item of data in a detailed style view. The -nohdr parameter suppresses the display of these headings.

Note: If there is no data to be displayed, headings are not displayed.

-delim delimiter

(Optional) In a detailed view, each item of data has its own row, and if the headers are displayed, the data is separated from the header by a space. The -delim parameter overrides this behavior. Valid input for the -delim parameter is a one-byte character. In a detailed view, the data is separated from its header by the specified delimiter.

-bytes

(Optional) Requests output of capacities in bytes (instead of rounded values).

-filtervalue?

(Optional) Includes all of the valid filter attributes in the report. The following filter attributes are valid for the lsarray command:

balanced
capacity
distributed
mdisk_id
mdisk_name
mode
mdisk_grp_id
mdisk_grp_name
fast_write_state
raid_status
raid_level
redundancy
spare_goal
spare_protection_min
status
strip_size
tier
easy_tier_load

Any parameters specified with the -filtervalue? parameter are ignored.

-filtervalueattribute=value

(Optional) Specifies a list of one or more filter attributes matching the specified values; see -filtervalue? for the supported attributes. Only objects with a value that matches the filter attribute value are returned. If capacity is specified, the units must also be included. Use the unit parameter to interpret the value for size or capacity.

Note: Some filters allow the use of a wildcard when entering the command. The following rules apply to the use of wildcards when using the CLI:

The wildcard character is an asterisk (*).
The command can contain a maximum of one wildcard, which must be the first or last character in the string.
When using a wildcard character, you must enclose the filter entry within double quotation marks (""):
```
lsarray -filtervalue  "name=md*"
```

-filtervaluecapacity=value

(Optional) Specifies a list of one or more filter capacity (size) values matching the specified values for the unit parameter. Use the unit parameter to interpret the value for size or capacity.

-unitb | kb | mb | gb | tb | pb

(Optional) The units that are used when applying the -filtervalue capacity, where:

b = bytes
kb = 1,024 bytes
mb = 1,048,576 bytes
gb = 1,073,741,824 bytes
tb = 1,099,511,627,776 bytes
pb = 1,125,899,906,842,624 bytes

mdisk_id

(Optional) The identity of the array MDisk.

mdisk_name

(Optional) The name of the array MDisk.

Description

This command returns a concise list or a detailed view of array MDisks visible to the clustered system (system). Table 1 provides the attribute values that can be displayed as output view data.

Table 1. Array output
Attribute	Values
capacity	Indicates the value for the capacity specified using the -unit parameter.
status	online offline excluded degraded (applies only to internal MDisks)
mode	Indicates the mode. The values are: `unmanaged` `managed` `image` `array`
quorum_index	Indicates the quorum index. The values are: `0` `1` `2` Blank if the MDisk is not being used as a quorum disk
block_size	Indicates the block size. The value is `512` bytes (or blank) in each block of storage.
ctrl_type	`4`, `6`, where `6` is a flash drive attached inside a node and 4 is any other device
raid_status	Indicates the RAID status. The values are: offline The array is offline on all nodes. degraded The array has deconfigured or offline members; the array is not fully redundant. syncing The array members are all online, the array is synchronizing parity or mirrors to achieve redundancy. initializing The array members are all online, the array is initializing; the array is fully redundant. online The array members are all online, and the array is fully redundant.
fast_write_state	Indicates the cache state of the array. The values are: `empty`, which indicates that the array disk data is not changing `not_empty`, which indicates that the array disk data might change `corrupt`, which indicates that the array disk data is lost and the array is corrupt Repair can be initiated using the recoverarray or recoverarraybysystem command.
raid_level	Indicates the RAID level of the array. The values are: `RAID0` `RAID1` `RAID5` `RAID6` `RAID10`
redundancy	Indicates the number of member disks that can fail concurrently without causing the array to fail.
strip_size	Indicates the strip size of the array (in KB).
spare_goal	Indicates the number of spares that the array members should be protected by. For distributed arrays, this value is blank.
spare_protection_min	Indicates the minimum number of spares that an array member is protected by. For distributed arrays, this value is blank.
balanced	Indicates whether the array is balanced to its spare goals: `exact` indicates that all populated members have the same (matching) capability and location. `yes` indicates that all populated members have at least the same capability and chain, but a different enclosure or slot. `no` indicates that it is unbalanced.
balanced	For nondistributed arrays, this indicates if the array is balanced to its spare goals: `exact` indicates that all populated members have the same (matching) capability and location. `yes` indicates that all populated members have at least the same capability and chain, but a different enclosure or slot. `no` indicates that it is unbalanced. For distributed arrays, this indicates whether a superior drive class is being used for the array: `exact` indicates that the same drive class is in use. `yes` indicates that at least one array member exceeds the array drive class. For distributed arrays, the array must also be balanced to its rebuild area goals.
tier	Indicates the tier that this array is assigned to by auto-detection (for internal arrays) or by the user: `tier0_flash` `tier1_flash` `tier_enterprise` `tier_nearline` Note: Use the chmdisk command to change this value.
replacement_date	Indicates the date of a potential array failure. The format must be `YYMMDD`.
easy_tier_load	Indicates the value for Easy Tier settings, and is either blank (for arrays) or one of the following values (for MDisks): : `low` `medium` `high` `very_high`
slow_write_priority	Indicates the response time goal: `latency` indicates that the array is taken out of synchronization to quickly complete write operations that take excessive time. `redundancy` indicates slow write operations are completed in normal time and the arrays remain synchronized.
site_id	Indicates the site value for the storage pool. This numeric value is `1`, `2`, `3`, or blank.
site_name	Indicates the site name for the storage pool. This value is alphanumeric or is blank.
fabric_type	Indicates a Fibre Channel (FC), SAS, or another type of array. `fc` indicates an array from an FC controller `sas_direct` indicates an array from an SAS direct-attached controller
distributed	Indicates whether the array is distributed. The values are `yes` or `no`.
drive_class_id	Indicates the drive class that makes up this array. If -allowsuperior was used during array creation, the lowest used drive class ID is displayed. This value is blank for nondistributed arrays.
drive_count	Indicates the total width of the array, including rebuild areas. The value is a number from `4` to `128`. The minimum value for RAID-6 and RAID-10 arrays is `6`.
stripe_width	Indicates the width of a single unit of redundancy within a distributed set of drives. The values are: Any number from `3` - `16` for RAID-5 arrays Any number from `4` - `16` for RAID-6 arrays An even number from `2` - `16` for RAID-10 arrays
rebuild_areas_total	Indicates the total number of rebuild areas set when the array is created. These rebuild areas provide performance but no capacity. The value is `1` - `4` for distributed array RAID-5 and distributed array RAID-6. The value is blank for nondistributed arrays.
rebuild_areas_available	Indicates the number of remaining rebuild areas within the set of drives. The value is `1` - `4` for distributed array RAID-5 and distributed array RAID-6. The value is blank for nondistributed arrays.
rebuild_areas_goal	Indicates the rebuild areas threshold (minimum limit) at which point the array logs an error. The value is `1` - `4` for distributed array RAID-5 and distributed array RAID-6. The value is blank for nondistributed arrays.

This list defines the status fields:

online: The MDisk is online and available.
degraded: (Internal MDisks only) The array has members that are degraded, or the raid_status is degraded.
degraded_ports: There are one or more MDisk port errors.
degraded_paths: One or more paths to the MDisk have been lost; the MDisk is not online to every node in the system.
offline: All paths to the MDisk are lost.
excluded: The MDisk is excluded from use by the system; the MDisk port error count exceeded the threshold.

A concise invocation example

lsarray -delim :

The resulting output:

mdisk_id:mdisk_name:status:mdisk_grp_id:mdisk_grp_name:capacity:raid_status:raid_level:redundancy:strip_size:tier:distributed
1::online:0:mdiskgrp0:68.4GB:online:raid0:0:256:enterprise:yes
2:mdisk2:online:0:mdiskgrp0:88.4GB:syncing:raid5:1:256:nearline:no
533:mdisk533:degraded:1:mdiskgrp1:78.2GB:syncing:raid6:2:128:ssd:yes
534:mdisk534:online:2:mdiskgrp1:94.2GB:initting:raid6:2:64:ssd:no

A detailed invocation example

lsarray

The resulting output:

mdisk_id 144
mdisk_name draid6_5
status online
mode array
mdisk_grp_id 1
mdisk_grp_name pool_512
capacity 5.6TB
quorum_index
block_size
controller_name
ctrl_type
ctrl_WWNN
controller_id
path_count
max_path_count
ctrl_LUN_#
UID
preferred_WWPN
active_WWPN
fast_write_state not_empty
raid_status initting
raid_level raid6
redundancy 2
strip_size 256
spare_goal
spare_protection_min
balanced exact
tier tier0_flash
replacement_date 121110090907
slow_write_priority redundancy
fabric_type
site_id
site_name
easy_tier_load
encrypt no
distributed yes
drive_class_id 1
drive_count 28
stripe_width 15
rebuild_areas_total 4
rebuild_areas_available 4
rebuild_areas_goal 2

A detailed invocation example

lsarray 1

The resulting output:

mdisk_id:1
mdisk_name:
status:online
mode:array
mdisk_grp_id:0
mdisk_grp_name:mdiskgrp0
capacity:68.4GB
quorum_index:
block_size:
controller_name:
ctrl_type:
ctrl_WWNN:
controller_id:
path_count:
max_path_count:
ctrl_LUN_#:
UID:
preferred_WWPN:
active_WWPN:
node_id:
node_name:
location:fast_write_state:empty
raid_status:online
raid_level:raid0
redundancy:0
strip_size:256
spare_goal:2
spare_protection_min:2
balanced:yes
tier tier1_flash
replacement_date 121110090907
slow_write_priority:latency
fabric_type:distributed no
 drive_class_id
 drive_count 8
 stripe_width 4
 total_rebuild_areas 
 available_rebuild_areas 
 rebuild_areas_goal