You must be aware of the requirements for attaching the Lenovo Storage V series system to HP 9000 and HP Integrity servers.
You must meet the following requirements before you can
attach the
Lenovo Storage V series system to your host system:
- Check the LUN limitations for your host. Ensure that enough Fibre Channel adapters are installed in the server to manage
the total LUNs that you want to attach.
Note: If you want
to use more than eight LUNs per SCSI target, you must set the type
attribute to hpux when you create the host object.
You can use the
system command-line interface or the management GUI to set this attribute.
- The system supports HP-UX version 11.31 September 2007 (and
later 0803) releases. Hosts that attach to the system and that have
0709 patches must also have the following patches applied:
- PHKL_37453 (esdisk)
- PHKL_37454 (esctl)
- PHCO_37483 (scsimgr)
The 0803 bundle contains these patches. Note: An RPQ is required
if you are using a version earlier than the HP-UX 11.31 September
2007 release.
- Ensure that you have the documentation for your HP system and
the installation information for your Lenovo hardware.
- Ensure that you have installed the correct operating systems and
version levels on your host.
The following Web sites provide all system publications: