You can use fix procedures to diagnose and resolve problems
with the system.
For example, to repair a system, you might complete the
following tasks:
- Analyze the event log (if it is available, or view node errors)
- Replace failed components
- Verify the status of a repaired device
- Restore a device to an operational state in the system
- Mark the error as fixed in the event log
Fix procedures help simplify this process by automating as
many of the tasks as possible.
The following
example uses the management GUI to repair a system.
Complete the following steps to start the fix procedure.
- Click and ensure that you are
filtering the event log to display Recommended actions.
The list might indicate that many errors must be repaired.
If the list contains several errors, the error at the top of the list
has the highest priority and must always be fixed first. If you do
not fix the higher priority errors first, you might not be able to
fix the lower priority errors.
- Select the error at the top of the list or select the Next recommended action.
- Click Run Fix Procedure.
The pane displays the error code and provides a description
of the condition.
- Click Next to go forward or Cancel to return to the previous pane.
One or more panes might be displayed with instructions
for you to replace parts or complete other repair activity.
- If you are not able to complete the actions now, click Cancel until you return to the previous pane. Click Cancel until you are returned to the Next
recommended action pane. When you return to the fix procedures,
the repair can be restarted from step 1. After you complete all the instructions, click OK. When the last repair action is completed, the procedures might
attempt to restore failed devices to the system.
- After you complete the fix, you see the statement Click OK to mark the error as fixed. Click OK. This action marks the error as fixed in the event
log and prevents this instance of the error from being listed again.
- When you see the statement The repair has
been completed., click Exit.
If other errors must be fixed, those errors are displayed and the
fix procedures continue.
If no errors remain, the following statement is displayed: There are no unfixed errors in the event log.