Use the rmpartnership command to remove
a Metro Mirror or Global Mirror partnership on one clustered system
(system). Because the partnership exists on both systems, it is necessary
to run this command on both systems to remove both sides of the partnership.
If the command is run on only one system, the partnership enters a
partially configured state on the other system.
Syntax
rmpartnership { remote_cluster_id | remote_cluster_name }
Parameters
- remote_cluster_id | remote_cluster_name
- (Required) Specifies the system ID or the name of the remote system.
Description
This
command deletes one half of a partnership on a system. To remove
the entire partnership, you must run the command twice, once on each
system.
Attention: Before
running the rmpartnership command, you must remove
all relationships and groups that are defined between the two systems.
To display system relationships and groups, run the lsrcrelationship and lsrcconsistgrp commands.
To remove the relationships and groups that are defined between the
two systems, run the rmrcrelationship and rmrcconsistgrp commands.
An invocation example
rmpartnership cluster1
The
resulting output:
No feedback