Explanation
The drive firmware download has been cancelled
by the user or the system and problem diagnosis required.
User Response
If you cancelled the download using applydrivesoftware
-cancel then this error is to be expected.
If you
changed the state of any drive while the download was ongoing, this
error is to be expected, however you will have to rerun the applydrivesoftware to
ensure all your drive firmware has been updated.
Otherwise:
- Check the drive states using lsdrive, in particular
look at drives which are status=degraded, offline or use=failed.
- Check node states using lsnode or lsnodecanister,
and confirm all nodes are online.
- Use lsdependentvdisks -drive <drive_id> to
check for vdisks that are dependent on specific drives.
- If the drive is a member of a RAID0 array,
consider whether to introduce additional redundancy to protect the
data on that drive.
- If the drive is not a member of a RAID0
array, fix any errors in the event log that relate to the array.
- Consider using the -force option. With any drive
software upgrade there is a risk that the drive might become unusable.
Only use the -force option if you accept this risk.
- Reissue the applydrivesoftware again.
Note: The lsdriveupgradeprogress command can
be used to check the progress of the applydrivesoftware command
as it updates each drive.