Explanation
Boot drive problems
User Response
Complete the following steps:
- Look at a boot drive view to determine the problems.
- Run the commands lsnodebootdrive / lsbootdrive to
display a status for each slot for users and DMPs to diagnose and
repair problems.
- If you plan to move any drives, shut down the node if booted
yes is shown for that drive in the boot drive view (lsbootdrive).
After you move the drives, a different node error will probably be
displayed for you to work on.
- If you plan to set the serial number of the system board, see satask
chvpd.
- If there is still no usable persistent data on the boot drives,
then contact IBM Remote Technical Support.
Possible Cause-FRUs or other: