CMMVC8708E: The command failed because the system does not have a hyperswap topology.

An attempt was made to create a HyperSwap^® volume on a system that does not have a HyperSwap^® topology. The mkvolume command attempts to create a HyperSwap^® volume in either of the following circumstances:

• Two I/O groups are specified in the command
• Two storage pools are specified within two independent sites that have a HyperSwap^® topology. In this case the iogrp parameter can be omitted and the system will auto-select an I/O group.

Complete one of the following actions:

• If you entered the command incorrectly, correct the command and retry.
• Enter the mkvolume command with a single -iogrp parameter to create a basic volume.
• Configure the system to use a HyperSwap^® topology and retry the command.