Problem: Control enclosure is not detected

After you install a new control enclosure, it might not be detected by the system. This procedure can help you resolve the problem.

If a control enclosure is not detected by the system, complete the following steps to resolve the problem.

1. To add a control enclosure to the system, select Monitoring > System in the management GUI.
2. On the System page, select Actions > Add Enclosures.
3. If the control enclosure is not detected, make sure that all of following requirements are true.
   • The enclosure is powered on.
   • The enclosure is not part of another system.
   • At least one node is in candidate state.
   • The Fibre Channel cables are connected.
   • Zoning is set up according to the zoning rules defined in the SAN configuration and zoning rules summary topic.