If 10 Gbps iSCSI-FCoE 4-port host interface adapters are installed on your Lenovo Storage V series system, you can use Fibre Channel cables to connect them to your 10 Gbps Ethernet or FCoE SAN.
The Fibre Channel cables are connected in pairs.
Both canisters must have the same number of cables connected.
To install the cables, complete the following steps.
If optional 4-port 10 Gbps Ethernet host interface
adapters are installed in the node canisters, connect each port
to the network that will provide connectivity to that port.
To provide redundant connectivity, connect both node canisters
in a control enclosure to the same networks.
Figure 1 shows an example Lenovo Storage V3700 V2 configuration that uses 10 Gbps iSCSI-FCoE 4-port host interface adapters.
Figure 1. Example Lenovo Storage V3700 V2 configuration with 10 Gbps iSCSI-FCoE 4-port host interface adapters
Figure 2 shows an example of a Lenovo
Storage V3700 V2 XP configuration that uses 10 Gbps iSCSI-FCoE 4-port host interface adapters.
Figure 2. Example Lenovo
Storage V3700 V2 XP configuration with 10 Gbps iSCSI-FCoE 4-port host interface adapters
Figure 3 shows an example of a Lenovo Storage V5030 configuration that uses 10 Gbps iSCSI-FCoE 4-port host interface adapters.
Figure 3. Example Lenovo Storage V5030 configuration with 10 Gbps iSCSI-FCoE 4-port host interface adapters
