Use this command to create a storage system.
Syntax
satask mkcluster -clusterip ipv4 [ -gw ipv4 ] [ -mask ipv4 ] [ -name cluster_name ]
satask mkcluster -clusterip_6 ipv6 [ -gw_6 ipv6 ] [ -prefix_6 int ] [ -name cluster_name ]
Parameters
- -clusteripipv4
- (Optional) The IPv4 address for Ethernet port 1 on the system.
- -gwipv4
- (Optional) The IPv4 gateway for Ethernet port 1 on the system.
- -maskipv4
- (Optional) The IPv4 subnet for Ethernet port 1 on the system.
- -clusterip_6ipv6
- (Optional) The IPv6 address for Ethernet port 1 on the system.
- -gw_6ipv6
- (Optional) The IPv6 gateway for Ethernet port 1 on the system.
- -prefix_6int
- (Optional) The IPv6 prefix for Ethernet port 1 on the system.
- -namecluster_name
- (Optional) The name of the new system.
Description
This
command creates a storage system.
This command calls the satask mkcluster command.