Use the mkvolumehostclustermap command to generate a new mapping
between a volume and a host cluster on a clustered system. This volume is then accessible for
input or output (I/O) operations to the specified host cluster.
Syntax
mkvolumehostclustermap [ -scsi scsi_num_arg ] [ -force ] -hostcluster { hostcluster_id | hostcluster_name } { volume_id | volume_name }
Parameters
- -scsi_scsi_num_arg
- (Optional) Specifies the Small Computer System Interface (SCSI) logical unit number (LUN) ID to
assign to a volume on the specified host cluster. The SCSI LUN ID is assigned to the volume on the
host cluster for all I/O groups that provide access to the volume.
Note: You must use the next
available SCSI LUN ID for each host in the host cluster.
- -force
- (Optional) This must be specified to map a volume to a host cluster and that volume is already
mapped to at least one host in a different host cluster.
Remember: Using
the force parameter might result in a loss of access. Use it only under the direction of your
product support information.
- -hostclusterhostcluster_id | hostcluster_name
- (Required) Specifies the host cluster (by ID or name) to map to the volume. The value for the ID
must be a number and the value for the name must be an alphanumeric string.
- volume_id | volume_name
- (Optional) Specifies the volume by ID or name. The value for the ID must be a number and the
value for the name must be an alphanumeric string.
Description
This command generates a new mapping between a volume and a host cluster on a clustered system
(system). This volume is then accessible for input or output (I/O) operations to the specified
host cluster.
An invocation example that maps volume 0 to host cluster
0
mkvolumehostclustermap -hostcluster 0 0
The detailed resulting output:
No feedback
An invocation example that maps volume myvolume1 to host cluster
myhostcluster and specifies SCSI LUN ID 7
mkvolumehostclustermap -hostcluster myhostcluster -scsi 7 myvolume1
The detailed resulting output:
No feedback