You must be aware of the requirements for attaching the Lenovo Storage V series system to HP 9000 and HP Integrity servers.
You must meet the following requirements before you can
attach the
Lenovo Storage V series system to your host system:
- Check the LUN limitations for your host system. Ensure that enough Fibre Channel adapters are installed in the server to manage
the total LUNs that you want to attach.
Note: If you want to use more
than eight LUNs per SCSI target, you must set the type attribute to hpux when you create the host object. You can use the Lenovo Storage V series system command-line interface or the management GUI to set this attribute.
- The Lenovo Storage V series system supports HP-UX version 11.31 September
2007 (and later 0803) releases. Hosts that attach to the Lenovo Storage V series system and that have 0709 patches must also
have the following patches applied:
- PHKL_37453 (esdisk)
- PHKL_37454 (esctl)
- PHCO_37483 (scsimgr)
The 0803 bundle contains these patches. Note: An RPQ is required
if you are using a version earlier than the HP-UX 11.31 September
2007 release.
- Ensure that you have the documentation for your HP system and
the installation information for your Lenovo hardware.
- Ensure that you have installed the correct operating systems and
version levels on your host.
The following website provides all
Lenovo Storage V series system publications: