Controller
settings for IBM® DS5000, IBM DS4000,
and IBM DS3000 systems
Controller settings are the settings that apply across
one IBM® DS5000, IBM® DS4000™,
or IBM® DS3000 system.
You must configure
the following settings for IBM® DS5000, IBM® DS4000™,
and IBM® DS3000 systems:
Set the host type for Lenovo Storage V series to IBM
TS SAN VCE.
Set the system so that both storage systems have
the same worldwide node name (WWNN). See the following website for
the scripts that are available to change the setup for IBM® DS5000, IBM® DS4000™,
and IBM® DS3000 systems:
Ensure that the AVT option is enabled. The host type selection
should have already enabled the AVT option. View the storage system
profile data to confirm that you have the AVT option enabled. This
storage profile is presented as a text view in a separate window. See
the following website for the scripts that are
available to enable the AVT option:
Miscellaneous settings for IBM DS5000, IBM DS4000, or IBM DS3000 systems The Lenovo Storage V seriesclustered system supports all media scan settings that are provided by the system. Set the background media scan to enabled and set the frequency to 30 days. These settings are enabled at both the system level and the individual logical drive level.