Explanation
When the Lenovo Storage V series software
starts, it reads the node serial number from the system board and
compares this serial number to the node serial numbers stored on the
two boot drives. There must be at least two matching node serial numbers
for the Lenovo Storage V series software
to assume that node serial number is good.
User Response
Look at a boot drive view for the node to work out
what to do.
- Replace missing or failed drives.
- Put any drive that belongs to a different node back where it belongs.
- If you intend to use a drive from a different node in this node
from now on, the node error changes to a different node error when
the other drive is replaced.
- If you replaced the system board, then the panel name is now 0000000,
and if you replaced one of the drives, then the slot status of that
drive is uninitialized. If the node serial number of the other boot
drive matches the MT-M S/N label on the front of the node, then run satask
rescuenode to initialize the uninitialized drive. Initializing
the drive should lead to the 545 node error.
Possible Cause-FRUs or other: