The amount of memory detected in the node canister differs from the amount required for the canister to operate as an active member of a system. The error code data shows the detected memory, in MB, followed by the minimum required memory, in MB, there is then a series of values indicating the amount of memory, in GB, detected in each memory slot.
The amount of memory detected in the node canister differs from the amount required for the canister to operate as an active member of a system. The error code data shows the detected memory, in MB, followed by the minimum required memory, in MB; there is then a series of values indicating the amount of memory, in GB, detected in each memory slot.
This might be reported because a memory module has failed or because a memory module has been removed from the canister.
The amount of memory detected in the node differs from the amount required for the node to operate as an active member of a system. The error code data shows the detected memory, in MB, followed by the minimum required memory, in MB. The next series of values indicates the amount of memory, in GB, detected in each memory slot.
The amount of memory detected in the node canister differs from the amount required for the canister to operate as an active member of a system. The error code data shows the detected memory (in MB) followed by the minimum required memory (in MB). A series of values indicates the amount of memory (in GB) detected in each memory slot.
Check the memory size of another 2145 that is in the same cluster. For the 2145-CF8 and 2145-CG8, if you have just replaced a memory module, check that the module that you have installed is the correct size, then go to the light path MAP to isolate any possible failed memory modules.
Possible Cause-FRUs or other:
Contact your hardware manufacturer.