Explanation
The enclosure vital product data indicates that
the enclosure midplane has been replaced. There is no cluster state
information on the other node canister in the enclosure (the partner
canister), so both node canisters from the original enclosure have
not been moved to this one.
User Response
Follow troubleshooting procedures to relocate nodes to the correct location:
- Follow the procedure: Getting node canister and system information and review the saved location
information of the node canister and determine why the second node canister from the original
enclosure was not moved into this enclosure.
- If you are sure that this node canister came from the enclosure that is being replaced, and the
original partner canister is available, use the "Replacing a node canister" procedure to
install the second node canister in this enclosure. Restart the node canister. The two node
canisters should show node error 504, and the actions for that error should be followed.
- If you are sure this node canister came from the enclosure that is being replaced, and that the
original partner canister has failed, continue following the remove and replace procedure for an
enclosure midplane and configure the new enclosure.
Possible Cause—FRUs or other: