Explanation
The software has restarted because of a problem
in the cluster, on a disk system or on the Fibre
Channel fabric.
User Response
- Collect the software dump file(s) generated at the time the error
was logged on the cluster.
- Contact your product support center to investigate and resolve
the problem.
- Ensure that the software is at the latest level on the cluster
and on the disk systems.
- Use the available SAN monitoring tools to check for any problems
on the fabric.
- Mark the error that you have just repaired as "fixed".
- Go to repair verification Map.
Possible Cause-FRUs or other:
- Your support center might indicate a FRU based on their problem
analysis (2%)
Other:
- Software (48%)
- Enclosure/controller software (25%)
- Fibre Channel switch or switch
configuration (25%)