1370: A managed disk error recovery procedure (ERP) has occurred.

Explanation

This error was reported because a large number of disk error recovery procedures have been performed by the disk controller. The problem is probably caused by a failure of some other component on the SAN.

User Response

  1. View the event log entry and determine the managed disk that was being accessed when the problem was detected.
  2. Perform the disk controller problem determination and repair procedures for the MDisk determined in step 1.
  3. Perform problem determination and repair procedures for the Fibre Channel (FC) switches connected to the 2145 and any other FC network components.
  4. If any problems are found and resolved in steps 2 and 3, mark this error as "fixed".
  5. If no switch or disk controller failures were found in steps 2 and 3, take an event log dump. Call your hardware support center.
  6. Go to repair verification MAP.

Possible Cause-FRUs or other:

Other: