1340: A managed disk has timed out.

Explanation

This error was reported because a large number of disk timeout conditions have been detected. The problem is probably caused by a failure of some other component on the SAN.

User Response

1. Repair problems on all enclosures or controllers and switches on the same SAN as this 2145 cluster.
2. If problems are found, mark this error as "fixed".
3. If no switch or disk controller failures can be found, take an event log dump and call your hardware support center.
4. Go to repair verification MAP.

Possible Cause-FRUs or other:

• None

Other:

• Enclosure/controller fault
• Fibre Channel (FC) switch