Explanation
The power supply unit (PSU) is not seated in the
enclosure, or no PSU is installed.
User Response
- If no PSU is installed, install a PSU.
- If a PSU is installed, reseat the PSU in the enclosure.
Attention: To avoid losing state and data from the node, use the
satask startservice command to put the node into service state so that it no
longer processes I/O. Then you can remove and replace the top power supply unit (PSU 2). This
precaution is due to a limitation in the power-supply configuration. Once the service action is
complete, run the satask stopservice command to let the node rejoin the system.
Possible
Cause-FRUs or other:
- No Part (5%)
- PSU (95%)
Reseat the power supply unit in the enclosure.
Possible
Cause-FRUs or other:
Power supply (100%)