This section details the in-band automated boot recovery
method.
Note: Use this method if the BOARD LED on the light path
diagnostics panel is lit and there is a log entry or Booting
Backup Image is displayed on the firmware splash screen;
otherwise, use the in-band manual recovery method.
- Boot the server to an operating system that is supported
by the firmware update package that you downloaded.
- Perform the firmware update by following the instructions
that are in the firmware update package readme file.
- Restart the server.
- At the firmware splash screen, press F3 when prompted to
restore to the primary bank. The server boots from the primary bank.