Use the troubleshooting tables to find solutions to problems
that have identifiable symptoms.
Two column
table for documenting the symptom and the corresponding action for
microprocessor problems.
- Follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved.
- If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained technician.
- Go to the support website at the Lenovo Support Portal to check for technical information, hints, tips,
and new device drivers or to submit a request for information.
|
| Symptom |
Action |
| The server goes directly to the POST Event Viewer
when it is turned on. |
- Correct any errors that are indicated by the LCD system information
display panel (if available).
- Make sure that the server supports all the microprocessors and
that the microprocessors match in speed and cache size. To view the
microprocessor information, run the Setup Utility and select .
- (Trained technician only) Make sure that microprocessor 1 is seated
correctly.
- (Trained technician only) Remove microprocessor 2 and restart
the server.
- Replace the following components one at a time, in the order shown,
restarting the server each time:
- (Trained technician only) Microprocessor
- (Trained technician only) System board
|