Use the troubleshooting tables to find solutions to problems
that have identifiable symptoms.
Two column
table for documenting the symptom and the corresponding action for
hypervisor problems.
- Follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved.
- If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained technician.
- Go to the support website at the Lenovo Support Portal to check for technical information, hints, tips,
and new device drivers or to submit a request for information.
|
| Symptom |
Action |
| If an optional embedded hypervisor flash device
is not listed in the expected boot order, does not appear in the list
of boot devices, or a similar problem has occurred. |
- Make sure that the optional embedded hypervisor flash device is
selected on the boot manager <F12> Select Boot Device at startup.
- Make sure that the embedded hypervisor flash device is seated
in the connector correctly (see Removing a USB embedded hypervisor flash device and Replacing a USB embedded hypervisor flash device).
- See the documentation that comes with the optional embedded hypervisor
flash device for setup and configuration information.
- Make sure that other software works on the server.
|