Removing and replacing consumable parts and Tier 1 CRUs

Replacement of consumable parts and Tier 1 CRUs is your responsibility. If IBM installs a consumable part or Tier 1 CRU at your request, you will be charged for the installation.

Note

The illustrations in this document might differ slightly from your hardware.

• Removing the cover
  Use this information to remove the cover.
• Installing the cover
  Use this information to install the cover.
• Removing the microprocessor 2 air baffle
  Use this information to remove the microprocessor 2 air baffle.
• Installing the microprocessor 2 air baffle
  Use this information to install the microprocessor 2 air baffle.
• Removing the DIMM air baffle
  Use this information to remove the DIMM air baffle.
• Installing the DIMM air baffle
  Use this information to install the DIMM air baffle.
• Removing a memory module
  Use this information to remove a memory module.
• Installing a memory module
  The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs.
• Removing a hot-swap hard disk drive
  Use this information to remove a hot-swap hard disk drive.
• Installing a hot-swap hard disk drive
  Use this information to install a hot-swap hard disk drive.
• Removing a simple-swap hard disk drive
  Use this information to remove a simple-swap hard disk drive.
• Installing a simple-swap hard disk drive
  Use this information to install a simple-swap hard disk drive.
• Removing an optional DVD drive
  Use this information to remove an optional DVD drive.
• Installing an optional DVD drive
  Use this information to install an optional DVD drive.
• Removing an adapter
  Use this information to remove an adapter.
• Replacing an adapter
  Use this information to replace an adapter.
• Removing the SAS/SATA RAID riser-card assembly
  Use this information to remove the SAS/SATA RAID riser-card assembly.
• Installing the SAS/SATA RAID riser-card assembly
  Use this information to install the SAS/SATA RAID riser-card assembly.
• Removing a ServeRAID SAS/SATA controller from the SAS/SATA RAID riser card
  Use this information to remove a ServeRAID SAS/SATA controller from the SAS/SATA RAID riser card.
• Installing a ServeRAID SAS/SATA controller on the SAS/SATA RAID riser card
  Use this information to install a ServeRAID SAS/SATA controller on the SAS/SATA RAID riser card.
• Removing an optional ServeRAID adapter advanced feature key
  Use this information to remove an optional ServeRAID adapter advanced feature key.
• Installing an optional ServeRAID adapter advanced feature key
  Use this information to install an optional ServeRAID adapter advanced feature key.
• Removing a hot-swap fan assembly
  Use this information to remove a hot-swap fan assembly.
• Installing a hot-swap fan assembly
  Use this information to install a hot-swap fan assembly.
• Removing a hot-swap ac power supply
  Use this information to remove a hot-swap ac power supply.
• Installing a hot-swap ac power supply
  Use this information to install a hot-swap ac power supply.
• Removing a USB embedded hypervisor flash device
  Use this information to remove a USB embedded hypervisor flash device.
• Installing a USB embedded hypervisor flash device
  Use this information to install a USB embedded hypervisor flash device.
• Removing the virtual media key
  Use this information to remove the virtual media key.
• Installing the virtual media key
  Use this information to install the virtual media key.
• Removing the optional two-port Ethernet adapter
  Use this information to remove the optional two-port Ethernet adapter.
• Installing the optional two-port Ethernet adapter
  Use this information to install the optional two-port Ethernet adapter.
• Removing a remotely installed RAID adapter battery
  Use this information to remove a remotely installed RAID adapter battery.
• Installing a RAID adapter battery remotely in the server
  Use this information to install a RAID adapter battery remotely in the server.
• Removing the system battery
  Use this information to remove the system battery.
• Installing the system battery
  Use this information to install the system battery.