Skip to main content

Replacing the bezel

Use this information to install the bezel.

To install the bezel, complete the following steps:

  1. Insert the tabs on the bottom of the bezel into the holes on the chassis.
  2. Rotate the bezel upward to the server and reinstall the bezel screws. Then, install the EIA quick latch.
    Figure 1. Bezel installation
    Bezel installation
  3. Install the server into the rack enclosure and push the server into the rack until it clicks into place.
  4. Reinstall the hard disk drives and drive bay filler panels into the drive bays.
  5. Reconnect the power cords and any cables that you removed.
  6. Turn on the peripheral devices and the server.