Removing the operator information panel assembly

Use this information to remove the operator information panel assembly.

Read the safety information in Safety and Installation guidelines.

If you are replacing a server component in the server, you need to turn off the server and peripheral devices, and disconnect the power cords and all external cables.

To remove the operator information panel assembly, complete the following steps.

1. Remove the server cover (see Removing the cover).
2. Disconnect the signal cable from the operator information panel board.
3. Remove the screws that secure the operator information panel assembly to the DVD drive housing.
4. Lift the operator information panel assembly out of the server.

If you are instructed to return the server component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.