Configuring NetApp E-Series systems

You can attach a NetApp E-Seriesstorage system to a Lenovo Storage V7000 system.

NetApp E-Series supported models, firmware levels, and concurrent maintenance
The NetApp E-Seriesstorage systems are supported for use with Lenovo Storage V7000.
NetApp E-Series user interfaces
The NetApp E-Series includes the NetApp SANtricity Storage Manager GUI and a CLI.
Lenovo Storage V7000 recognition and technical speciation for NetApp E-Series
Models for NetApp E-Series are differentiated by the SCSI board ID, which is not shown under the command svcinfo lscontroller X.
Logical units and target ports on NetApp E-Seriesstorage systems
LUNs are provisioned from the NetApp E-Series as volumes. These LUNs appear as MDisks on Lenovo Storage V7000, which can be used to create storage pools and provision volumes for use by hosts or with tiering.
Switch zoning for NetApp E-Seriesstorage systems
Switch zoning configurations for the NetApp E-Series system include fabric zoning, target port sharing, host splitting, and controller splitting.
Configuration settings for NetApp E-Seriesstorage systems
The GUI access enables the intuitive setup of the NetApp E-Seriesstorage system logical unit numbers (LUNs) and masking/export to the Lenovo Storage V7000 system.
Quorum disks on NetApp E-Seriesstorage systems
Remember these functions and tasks when you use NetApp E-Series as an external storage system to Lenovo Storage V7000.
Functions for NetApp E-Seriesstorage systems
Remember these guidelines and processes when you use NetApp E-Series as an external storage system to Lenovo Storage V7000.

Parent topic: Configuring and servicing storage systems