Use the rmarray command to remove an array MDisk from the
configuration.
Syntax
rmarray -mdisk { mdisk_id_list | mdisk_name_list } [-force] { mdiskgrp_id | mdiskgrp_name }
Parameters
- -mdiskmdisk_id_list | mdisk_name_list
- (Required) Identifies the array MDisk or a colon-delimited list of MDisks to remove from
the storage pool.
- -force
- (Optional) Forces a removal when the MDisk has allocated extents by migrating the used
extents to free extents in the storage pool.
- mdiskgrp_id | mdiskgrp_name
- (Required) Identifies (by name or ID) the storage pool to remove the created array MDisk
from.
Description
This command removes an array
MDisk from the configuration. Each array is divided into candidate drives.
Remember: This command cannot be used to remove an array MDisk from
a child pool.
Note: If rmarray is used to remove an array that
contains compressed member drives, it causes all compressed drive members to perform a format.
The format must complete before the drives come online as candidates available for
use.
An invocation
example
rmarray -mdisk 6 mdiskgrp_10
The resulting output:
No feedback