lssystemsupportcenter

Use the lssystemsupportcenter command to list details about remote support servers.

Syntax

lssystemsupportcenter { [ support_center_name ] | [ support_center_id ] } [ -nohdr ] [ -delimdelimiter ]

Parameters

support_center_name | support_center_id
(Optional) Specifies a name or ID for a remote support server in the server index. The value for the ID must be a number (integer) and the value for the name must be an alphanumeric string. This parameter displays a full view of any configured name or ID values.
-nohdr
(Optional) By default, headings are displayed for each column of data in a concise style view, and for each item of data in a detailed style view. The -nohdr parameter suppresses the display of these headings.
Note: If no data is displayed, headings are not displayed.
-delim delimiter
(Optional) By default in a concise view, all columns of data are space-separated. The width of each column is set to the maximum width of each item of data. In a detailed view, each item of data has its own row, and if the headers are displayed, the data is separated from the header by a space. The -delim parameter overrides this behavior. Valid input for the -delim parameter is a 1-byte character. If you enter -delim : on the command line, the colon character (:) separates all items of data in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data is separated from its header by the specified delimiter.

Description

This command lists details about remote support servers.

This command returns a concise or detailed view of the remote support servers defined.

This table provides the attribute values that can be displayed as output view data.
Table 1. lssystemsupportcenter output
Attribute Description
id Indicates the support center or proxy server ID. The value must be a number (integer).
name Indicates the support center or proxy server name. The value must be an alphanumeric string.
IP_address Indicates the Internet Protocol Version 4 (IPv4) or Version 6 (IPv6) address for the new support center or proxy server. The value must be a valid IPv4 or IPv6 address.
port Indicates the port number for the configured support center or the proxy server. The value must be a number (integer).
proxy Indicates that the target server is a proxy server (and not the support center). The values are yes or no.

An invocation example

lssystemsupportcenter

The following output is displayed:

id name IP_address port proxy
0 proxy1 1.2.3.4 9999 yes
1 supportserver2 1.2.3.5 8888 no
2 test_frontend_server 9.51.88.165 1025 no 

An invocation example

lssystemsupportcenter 2

The following output is displayed:

id 2
name supportserver2
IP_address 1.2.3.5
port 8888
proxy no 

An invocation example

lssystemsupportcenter -delim :

The following output is displayed:

id:name:IP_address:port:proxy
0:proxy1:1.2.3.4:9999:yes
1:supportserver2:1.2.3.5:8888:no
2:test_frontend_server:9.51.88.165:1025:no