lscloudcallhome

Use the lscloudcallhome command to view the status of the Call Home information that is sent to a server in the Cloud.

Syntax

lscloudcallhome

No parameters are available for this command.

This command displays the status of Call Home information that is sent directly to a server in the Cloud. This table shows the possible output:

Table 1. lscloudcallhome output
Attribute	Description
status	Displays the status of the Cloud Call Home function. The possible values are `unsupported`, `disabled`, or `enabled`.
connection	Displays the connection state to the server. The possible values are: `active` - A good connection exists to the servers in the Cloud. `error` - A connection error exists. The error value that is displayed in the `error_sequence_number` field details the event log number that contains further information about the connection error. `untried` - A value of `untried` occurs directly after enabling cloud call home when the system is waiting for the results of a connection test.
error_sequence_number	Indicates the error sequence number that describes the cause of the connection error.
last_success	Displays the date and time of the last successful message that was sent. The format is `YYMMDDhhmmss`.
last_failure	Displays the date and time of the last message failure. The format is `YYMMDDhhmmss`.

lscloudcallhome

The following output is displayed:

status enabled
connection active
error_sequence_number
last_success 180314131223
last_failure 180313083907

lscloudcallhome

The following output is displayed:

status enabled
connection error
error_sequence_number 115
last_success 180314131223
last_failure 180313083907