If Access Logix is installed on the EMC CLARiiON controller, the
system does not have access to the storage controller logical units (LUs). You
must use the EMC CLARiiON configuration tools to associate the system and LU.
The following prerequisites must be met before you can configure an EMC CLARiiON controller
with Access Logix installed:
- The EMC CLARiiON controller is not connected to the system.
- You have a RAID controller with LUs, and you identified the LUs that you want to present to the
system.
You must complete the following tasks to configure an EMC CLARiiON controller with Access Logix
installed:
- Register the
system ports with the EMC CLARiiON.
- Configure storage groups.
The association between the
system and the LU is formed when you create a storage group that contains both the
LU and the system.