1268 - V3700 V2 and V5030

Explanation

A problem was found with the display panel for the enclosure. The alert event gives more information about the error.

045110 Enclosure display panel is not installed: The display panel is offline and might be missing.
045111 Enclosure display panel temperature sensor cannot be read: The temperature sensor for the display panel could not be read.
045119 Enclosure display panel VPD cannot be read: The Vital Product Data (VPD) for the display panel could not be read.

Complete the following steps:

Reseat the display panel:
1. Put the system into maintenance mode.
2. Slide the enclosure out of the rack sufficiently to remove the top cover and remove the top cover.
3. Locate the display panel access handle.
4. Pinch the sides of the display panel handle and remove the display panel module
5. Reinsert the display panel module.
6. Replace the cover and slide the enclosure back into the rack.
7. Turn off maintenance mode.
If the error does not clear, replace the display panel:
1. Turn on maintenance mode.
2. Slide the enclosure out of the rack sufficiently to remove the top cover and remove the top cover.
3. Locate the display panel access handle.
4. Pinch the sides of the display panel handle and remove the display panel module.
5. Insert the replacement display panel module.
6. Replace the cover and slide the enclosure back into the rack.
7. Turn off maintenance mode
If the error does not clear, the enclosure might need to be replaced. Contact your service support representative.