Explanation
An attempt was made to complete one of the following actions:
- Disable the key server encryption function while the system is configured to also use USB
encryption.
- Prepare a new key server key when key server encryption is being enabled for the first
time.
To safely allow key server encryption to be disabled, or to allow key server keys to be
prepared for the first time, the system checks that it has access to the current encryption key on
at least one of the USB flash drives. This error message is displayed because the system was not
able to read the key. Possible reasons for the failure include the following situations:
- The USB flash drive that is installed is defective.
- The USB flash drive belongs to a different system.
User Response
Verify that at least one working USB flash drive that contains the correct key for the system is
installed in the system, then retry the command.