You can configure the EMC Symmetrix and Symmetrix DMX system to attach to the
system.
On some versions of Symmetrix and Symmetrix DMX, the setting of SPC-2 can be configured. SPC-2 is
set either on a per-port basis or on a per-initiator basis. LUs that are mapped to the
system must be configured with SPC-2 disabled.
Note: Changing the value of the SPC-2 setting on a live system can cause errors. If you have a live
system that is running with SPC-2 enabled on LUs mapped to the
system, contact the IBM Support Center for guidance on how to proceed.
Do not disable SPC-2 on a live system before you take guidance from the IBM Support Center.