Return codes

The Common Information Model (CIM) return codes provide information on the status of CIM agent operations.

Common Information Model

Common Information Model return codes is a condensed list of possible CIM return codes.

Table 1. Common Information Model return codes
CIM return code Description Method Explanation
0 Success

GetFreeExtends()
ListConfiguration
Backups()

The parameters are valid. The method completed successfully.
AddNode() The node was successfully added.
CheckValidity() The information about the certificate was successfully obtained.
DeleteAccount() The account was successfully deleted.

GenerateCIMOM
Certificate()
EnableAuto
Generation()
DisableAuto
Generation()

The certificate was successfully deleted.
CreateCode() The new account was successfully created.

SetDefault
Validity()

The validity was successfully set.

GrantGlobal
Access()
GrantSystem
Access()

The role was successfully changed.

CreateGatewayID()
AddHardwareIDs
ToCollection()

The collection was successfully created.

DeleteStorage
HardwareID()

The StorageHardwareID was successfully deleted.

CreateStorage
HardwareID()

The StorageHardwareID was successfully created.
0 Success (continued) AttachDevice() The volume was successfully attached.

DeleteProtocol
Controller()

The controller was successfully deleted.

CreateProtocol
ControllerWith
Ports()

A clone was successfully created.

DeleteRemote
Cluster
Partnership()

The clustered system partnership was successfully deleted.

CreateRemote
Cluster
Partnership()

The clustered system partnership was successfully established.

DeleteHardwareID
Collection()

The collection was successfully created.
DeleteCertificate() The certificate was successfully deleted.

DeleteSynchronized
Set()

The SynchronizedSet was successfully deleted.

Modify
Synchronization()

The method was successfully run.
EvictNode() The node was successfully evicted.
0 Success (continued) RestartService() The CIMOM restarts.
Shutdown() The shutdown for the node/clustered system was successfully initiated.
SetLocale() The locale was set.
SetTimezone() The time zone for the clustered system was successfully set.

SetPasswords()
ModifyReset
Password
ChangeFeature()

The passwords were changed.

GetResetPassword
ChangeFeature
Status()

The feature status was successfully retrieved.

StartStatistics
Collection()

The statistics collection was started.
DetachDevice() The volume was successfully detached.

StopStatistics
Collection()

The statistics collection was stopped.

Backup
Configuration()

A backup was successfully created.

Reload
Configuration()

The configuration was reloaded.

Restore
Configuration()
Delete
Configuration
Backup()

A restore was successfully made.
AttachReplica() The copy relationship was successfully established.

CreateSynchronized
Set()

The SynchronizedSet was successfully created.
SetPassword() The password was successfully changed.
0 Job that is completed with no error

CreateOrModify
StoragePool()

The pool was successfully created.

CreateOrModify
ElementFrom
StoragePool()

The volume was successfully created. The pool was successfully modified.

DeleteStorage
Pool()

The pool was successfully deleted.

ReturnToStorage
Pool()

The volume was successfully deleted.
RequestDiscovery() BackendVolume discovery was successful.
SetIOGroup() The change was successful.
SetQuorum() The method was successful.

IncludeBackend
Volume()

The volume was successfully included.

ModifySynchronized
Set()

The CLI command was successfully run.
0 Job started successfully

MigrateVolume()
MigrateVolumeTo
lmageMode()

The migration job was started.
1 Not supported SetLocales() The clustered system does not support locales.
SetPasswords() The clustered system does not support password change (CISCO).

ModifyReset
PasswordChange
Feature()
GetResetPassword
ChangeFeature
Status()

The clustered system does not support the reset password change feature.
Upgrade() The method was called on a clustered system configuration service.
2 Failed Dump() Clean() Enter() Exit() Clean() GetDump() ClearLog() GetRecord() GetAllRecords() FixRecord() UnfixRecord()

ModifyError
Settings()
Create2062
Cluster()

An unexpected error occurred. A CLI command failed.
GetDump() Failure during command processing. The file was not found.

Reload
Configuration()

Failed to reload the configuration.
CreateCode() Failed to create the account.

GrantGlobal
Access()
GrantSystem
Access()

Failed to change the role.
SetPassword() Failed to change the password.
DeleteAccount() Failed to delete the account.
2 Unknown error

GenerateCIMOM
Certificate()
DeleteCertificate()

Failed to generate new certificate due to provider internal reasons.

EnableAuto
Generation()
DisableAuto
Generation()

Failed due to provider internal reasons.

SetDefault
Validity()

Failed to set validity.
CheckValidity() Failed to obtain information about certificate.
4 Failed

GenerateCIMOM
Certificate()
DeleteCertificate()

Unexpected error occurred. Failed to generate new certificate due to truststore problems.
5 Wrong Parameter Set

Delete
Configuration
Backup()

The wrong number or type of parameters were passed. The backup might not be found.

Modify
Synchronization()

The wrong number or type of parameters were passed or other parameter checking failed.

CreateCode()
GrantGlobal
Access()
SetPassword()
GrantSystem
Access()
DeleteAccount()
DeleteCertificate()
SetDefault
Validity()
CheckValidity()

One of the parameters is not valid.
5 Parameter not valid

Dump(),
GetDump()
PositionToFirst
RecordRoot()
GetRecord()
FixRecord()
UnfixRecord()

One of the mandatory parameters is missing.

ModifyIP
Address()
Create2062
Cluster()
Add2062Cluster()
Add2145Cluster()
Reset2062Node()
Reload2062Node()

One of the mandatory parameters is missing or not valid.

CreateOrModify
StoragePool()
CreateOrModify
ElementFrom
StoragePool()
Delete
StoragePool()
ReturnTo
StoragePool()

At least one of the parameters is not valid.

CreateGatewayID()
GenerateCIMOM
Certificate()

One of the parameters was not valid.
PositionAtRecord() One of the mandatory parameters is missing or having a negative number of records is not supported.
6 CopyType not supported

ModifySynchronized
Set()

The type of copy passed in was different from 3 or 4.
6 Operation not supported

ModifySynchronized
Set()

The operation code submitted is not valid for the copy type of the synchronized set.
6 SynchronizedSet is not empty

DeleteSynchronized
Set()

There are still StorageSynchronized associations in the set. All StorageSynchronized associations must be removed before deletion of the set can be run or the Force flag must be set.
6 User ID already exists CreateCode() The user ID that you submitted exists in another account.
6 In use

GenerateCIMOM
Certificate()

Failed to generate new certificate. Existing certificate is still valid and in use.
7 StorageSynchronized not in the Set   The synchronized storage does not exist in the set.
8 StorageSynchronized already in the Set   The synchronized storage already exists in the set and cannot be added.
9 StorageSynchronized incompatible with Set   The synchronized storage is not compatible with the Set. For example, a FlashCopy is synchronized to a Sync Copy set.
0x1000 Parameters checked – Job started   The CLI copy command was run and a job object was returned.
0x1000 LogicalDevices associated to other ProtocolControllers not deleted

DeleteProtocol
Controller()

At least one of the attached storage volumes is attached to another controller so it cannot be deleted.
0x1000 LogicalDevice instance not valid AttachDevice() The device is not a volume of the RedundancyGroup of the controller.
0x1000 LogicalDevice not associated to Controller DetachDevice() The device has no ProtocolControllerForUnit association to this controller.
0x1000 ID already created

CreateStorage
HardwareID()

The WWPN is already assigned to an existing storage hardware ID.
0x1000 Specified instance not found

DeleteStorage
HardwareID()

The storage hardware ID might not be found.
0x1000 HardwareID instance not valid

CreateGateway
ID()
AddHardwareIDs
ToCollection()

The storage hardware ID might not be found or is already a member of another collection.
0x1001 Size not supported

CreateOrModify
ElementFrom
StoragePool()

The requested size is not supported by the primordial pools. The size parameter contains the nearest supported size larger than the requested one. The size requested was not a multiple of 512. The nearest supported size that can be requested is returned in size.
0x1001 Device Number Conflict AttachDevice() The specified device number is already occupied.
0x1001 Hardware implementation does not support specified IDType

CreateStorage
HardwareID()

The type of ID is different from 2.
0x8000 ComputerSystem not valid AddNode() The submitted ComputerSystem was not a IBMTSSVC_ CandidateNode.
EvictNode() The submitted ComputerSystem was not a IBMTSSVC_Node.
Shutdown() The submitted ComputerSystem was not a IBMTSSVC_Node of IBMTSSVC_Cluster.
0x8000 Locale not valid SetLocale() The submitted Locale was greater than 9.
0x8000 Type not valid Dump() A type greater than 2 was passed in.
0x8000 Connection refused GetDump() A connection was lost to the clustered system or failed to connect to a node (CISCO only).
0x8000 Backup not found

Restore
Configuration()

The specified backup was not found.
0x8000 Delete failed

Delete
Configuration
Backup()

The deletion of the backup directory failed. The failure might be caused by a sharing violation.
0x8000 IOGroup must have Nodes aggregated SetIOGroup() The I/O group does not have any nodes.
0x8000 ID not valid SetQuorum() The quorum ID is a number greater than 2.
0x8000 Volume not valid

IncludeBackend
Volume()

The volume is not expelled.
0x8000 CopyType not supported AttachReplica() The type of copy that is passed in was different from 2 or 3.
CreateReplica() The type of copy that is passed in was different from 3 or 4.
0x8000 Ports are from multiple IOGroups

CreateProtocol
ControllerWith
Ports()

All ports are required to belong to the same I/O group.
0x8000 HardwareID still bound to AuthorizationSubject. Force required

DeleteStorage
HardwareID()

The hardware ID has access that is granted to a storage volume and Force was not specified.
0x8000 Host is member of a LUN mapping

DeleteHardware
IDCollection()

To delete this host either use this host to run the RemoveAccess method for each privilege and controller this host is associated to or set “Force” equal to “True.”
0x8000 Record(s) not found GetRecord() GetAllRecords() No records were found.
0x8000 Cannot connect to clustered system

Create2062
Cluster()
Add2062
Cluster()

Unable to connect to the clustered system.
0x8000 Connection to clustered system refused Add2145Cluster() The connection to the clustered system was refused.
0x8000 Connection to switch refused

Reset2062Node()
Reload2062Node()

The connection to the switch was refused.
0x8000 Management IP not found RemoveCluster() The IP for the clustered system cannot be found.
0x8001 Maximum number of nodes for clustered system exceeded AddNode() All I/O groups already have two nodes that are assigned to them.
0x8001 Prefix not valid Dump() A file prefix and feature log type were passed in at the same time.
0x8001 File not found GetDump() The given file path was not found (CISCO).
0x8001 Backup script failed

Backup
Configuration()

The backup script that is returned with an error.
0x8001 Restore script failed

Restore
Configuration()

The backup script that is returned with an error.
0x8001 Operation that is not supported for current state

Modify
Configuration()

The operation that is submitted is not supported in the current state of the synchronized storage. For example, you cannot have a “prepare” operation on a synchronized storage in “synchronized” state.
0x8001 Operation that is not supported for current SyncState

Modify
Synchronized
Set()

The operation is not supported by the current SyncState of the set.
0x8001 Unsupported protocol

CreateProtocol
ControllerWith
Ports()

Protocol != 2.
0x8001 Syntax error in ClusterName

Create2062
Cluster()
Add2062Cluster()
Reset2062Node()
Reload2062Node()

The clustered system name is not valid because of a syntax error.
0x8002 ExtraCapacitySet not valid AddNode() The submitted ExtraCapacitySet was not a IBMTSSVC_ IOGroupSet.
0x8002 Secure copy failed

Backup
Configuration()

The download of the backup file that uses secure copy failed.
0x8002 Secure copy failed

Upload
Configuration()

The upload of the backup file that uses secure copy failed.

CreateStorage
HardwareID()

The name of the element and setting are required to be null.
0x8002 Syntax error in Node or Node is not valid

Create2062
Cluster()
Add2062Cluster()
Reset2062Node()
Reload2062
Node()

The node contains a syntax error, or the specified node is not valid.
0x8003 Maximum number of Nodes for IOGroup exceeded AddNode() The submitted I/O group set already has two nodes that are assigned to it.
0x8003 Creation of backup directory failed

Backup
Configuration()

The backup directory cannot be created.
0x8003 Clear command failed

Upload
Configuration()

The clustered system /tmp/ directory cannot be cleared.
0x8003 Username or password not valid (only ResetNode)

Add2062Cluster()
Reset2062Node()
Reload2062Node()

The user name or password are not valid.
0x8004 Delete/rename of old backup files failed N/A The backup directory cannot be renamed or deleted.
0x8004 Wrong SwitchIP / cant connect to switch

Create2062
Cluster()
Add2062Cluster()

The IP for the switch is not correct, so a connection to the switch cannot be made.
0x8004 SwitchIP is not configured Reset2062Node() Reload2062Node() The IP for the switch is not configured.
0x8005 Syntax error in IP of clustered system N/A The IP for the clustered system contains a syntax error.
0x8006 Slot not valid N/A The slot is not valid.
0x8007 Cannot upload public key to switch N/A The public key cannot be uploaded to the switch.
0x8100 Clustered system scope violation N/A One or more parameters were out of the clustered system scope.
0x8200 N/A N/A The method was run successfully but one or more parameters were ignored.