Explanation
A Fibre Channel
adapter that was previously present has not been detected. The adapter
might have been deliberately removed, it might not be correctly installed,
or it might have failed.
Data:
- Location—A number indicating the adapter location. The location
indicates an adapter slot. See the node description for the definition
of the adapter slot locations.
User Response
- If possible, this noncritical node error should be
serviced using the management GUI and
running the recommended actions for the service error code.
There
are a number of possibilities.
- If you have deliberately removed the adapter (possibly replacing
it with a different adapter type), you will need to follow the management GUI recommended
actions to mark the hardware change as intentional.
- Use the remove and
replace procedures to remove and open the canister and check the adapter
is fully installed.
- If the previous steps have not isolated
the problem, use the remove and replace procedures to replace the
adapter, if this does not fix the problem replace the canister.
Possible Cause—FRUs or other cause:
- Fibre Channel adapter
- Node canister