3123: The quorum application needs to be redeployed.

A setting specific to the quorum application changed, which means that the quorum application might not be able to function as the active quorum device. Any of the following problems might be involved:

• A service IP was changed.
• A change in the IP network prevented the quorum application from reaching all the nodes.
• One or more nodes were permanently added to or removed from the cluster.
• The certificate was changed.

Complete the following steps:

1. Make sure that all Ethernet cables are connected correctly.
2. Make sure that the service IP addresses are set for all nodes.
3. Make sure that you can ping all nodes from the quorum application host.
4. Regenerate the JAR file that contains the new configuration by using the management GUI or the command line.
5. Transfer the new application to the deployment locations or the host or hosts.
6. Stop the old application.
7. Start the new application.
8. Verify that the cluster is using the quorum application as the active quorum device by using the lsquorum command.