Before you can install options in a node canister, you
must gain access by opening the canister cover.
To open the canister, complete the following steps.
- If the canister is already installed in the enclosure,
remove it as shown in Removing a node canister.
- Unlatch the release levers and pull them open.
The canister moves out of the slot approximately 0.6cm
(0.25 inch).
- Slide the canister out of the enclosure.
Figure 1. Removing
a node canister
- Turn the canister over and open
the cover as shown in Removing the canister cover.
- Press the recessed blue touch points on the cover.
- Slide the cover away from the thumbscrew end of the
canister.
Figure 2. Removing
the canister cover