lsvdisksyncprogress

Use the lsvdisksyncprogress command to display the progress of volume copy synchronization.

Syntax

lsvdisksyncprogress   [  -nohdr  ]   [  -delim  delimiter  ]   [  -copy  id  ] [ { vdisk_name | vdisk_id } ]

Parameters

-copyid
(Optional) Specifies the volume copy ID to list synchronization progress. You must also specify a vdisk_name | vdisk_id value. If you do not specify this parameter, progress is displayed for all copies.
-nohdr
(Optional) By default, headings are displayed for each column of data in a concise style view, and for each item of data in a detailed style view. The -nohdr parameter suppresses the display of these headings.
Note: If there is no data to be displayed, headings are not displayed.
-delim delimiter
(Optional) By default in a concise view, all columns of data are space-separated. The width of each column is set to the maximum width of each item of data. In a detailed view, each item of data has its own row, and if the headers are displayed, the data is separated from the header by a space. The -delim parameter overrides this behavior. Valid input for the -delim parameter is a 1-byte character. If you enter -delim : on the command line, the colon character (:) separates all items of data in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data is separated from its header by the specified delimiter.
vdisk_name | vdisk_id
(Optional) Specifies the volume name or ID to list synchronization progress.

Description

To display the volume copies that require synchronization, specify the command with no parameters. To display the synchronization progress for all copies of a volume, specify the command with the vdisk_name | vdisk_id parameter. Estimated completion time is displayed in the YYMMDDHHMMSS format. The command displays progress for the following special cases as:
  • A synchronized copy displays a progress of 100 and a blank estimated completion time.
  • An offline copy or a copy with a zero synchronization rate displays a blank estimated completion time. An offline copy displays (gradually) decreasing progress if the volume is being written to.
  • Nonmirrored volumes are displayed as a single copy with a progress of 100, and a blank estimated completion time.

The lsvdisksyncprogress command also displays the progress of a mirrored volume synchronization. After you create a mirrored volume by using the mkvdisk or addvdiskcopy command, you can use the command to monitor the progress of the synchronization.

An invocation example

lsvdisksyncprogress

The resulting output

vdisk_id vdisk_name copy_id progress estimated_completion_time
Draft comment:
0 vdisk0 0 100
0 vdisk0 1 50 070301150000 3 vdisk3 0 72 070301132225
Draft comment:
3 vdisk3 1 100
4 vdisk4 0 22 070301160000
Draft comment:
4 vdisk4 1 100 8 vdisk8 0 100
8 vdisk8 1 33

An invocation example

lsvdisksyncprogress vdisk0

The resulting output

vdisk_id vdisk_name copy_id progress estimated_completion_time
0        vdisk0     0       100
0        vdisk0     1       50       070301150000