Installing the Solaris iSCSI initiator

This section describes how to install the Solaris iSCSI initiator.

Confirm that the initiator service is installed by issuing this command:

pkginfo SUNWiscsiu SUNWiscsir

If the initiator service is not installed, follow the Solaris operating system instructions to install the service.

To install the Solaris iSCSI initiator, perform the following steps:

Use the IP address with the iscsiadm add command to indicate which discovery address to use with the host and Storwize V5000 systemclustered-system connection.
```
iscsiadm add discovery-address 192.168.1.97:3260
```
Issue this command for all Storwize V5000clustered-system Ethernet ports that you are using.
If you are using the Internet Storage Name Service (iSNS) server facility, issue the iscsiadm add iSNS-server command to locate the facility.
```
iscsiadm add iSNS-server 10.0.0.1:3205
```
Enable the iSCSI target discovery method with the iscsiadm modify discovery command.
- For file-based discovery, the command uses this form:
```
iscsiadm modify discovery --sendtargets enable
```
- For iSNS discovery, the command uses this form:
```
iscsiadm modify discovery --iSNS enable
```
Create the iSCSI device links for the local system.
```
devfsadm -i iscsi
```
Use the following command to stop the I/Os from the iSCSI disks:
```
iscsiadm remove discovery-address 192.168.1.22
```