The following graphics identify the hardware components and port
locations for the control enclosure and expansion enclosure on
the system.
The following figures show
the rear view of the control enclosures on Lenovo Storage V series systems. The location of the power supply units and node canisters
are also shown.
Figure 1 shows
the Lenovo Storage V3700 V2 control enclosure.
Figure 1. Lenovo Storage V3700 V2 control enclosure
Figure 2 shows
a rear view of the Lenovo
Storage V3700 V2 XP node.
Figure 2. Lenovo
Storage V3700 V2 XP control enclosure
Figure 3 shows a rear view of the Lenovo Storage V5030 and node.
Figure 3. Lenovo Storage V5030 and control enclosure
The following figures show the rear view
of the control enclosures on
Lenovo Storage V series systems. The location of the ports are shown.
- T Technician port
- 1 Ethernet port 1
- 2 Ethernet port 2
- 2/T Ethernet port 2/Technician port
- 3 SAS ports
Figure 4 shows
the Lenovo Storage V3700 V2 control enclosure.
Figure 4. Data ports on the rear of the Lenovo Storage V3700 V2 control enclosure
Figure 5 shows
the data ports on the back of the Lenovo
Storage V3700 V2 XP node.
Figure 5. Data ports on the rear of the Lenovo
Storage V3700 V2 XP control enclosure
Figure 6 shows the data ports on the back of a Lenovo Storage V5030 or node.
Figure 6. Data ports on the rear of the Lenovo Storage V5030 and control enclosure
Expansion enclosure components
Figure 7 shows the location
of the power supply units and expansion canisters.
- 1 Expansion canisters
- 2 Power supply units
Figure 7. Rear view of a Lenovo Storage V series expansion enclosure
Figure 8 shows the LEDs and SAS port locations from the rear view of an expansion
canister.
Each canister has two SAS ports that
are numbered 1 on the left and 2 on the right. Port 1 is used to connect
to a SAS expansion port on a node canister or port 2 of another expansion
canister.
Figure 8. SAS ports and LEDs in rear view of a Lenovo Storage V series expansion canister
Support rails and enclosures
Lenovo Storage V series systems use the same rails and enclosures for
both control and expansion enclosures.
All Lenovo Storage V series models use the same expansion enclosure.
- The ledge on the inside of each rail supports the entire length
of an enclosure.
- The enclosure support rails capture the left and right rear edges
of an inserted enclosure. This prevents the installed enclosure bouncing
when the rack is subjected to quake or vibration.
- The enclosure support rails adjust to fit racks from 595 mm to
755 mm deep, measured between the front and rear rack rails.
Figure 9. Enclosure support rails on Lenovo Storage V series
