This information assists you
in determining why the command file is not being processed, when using
a USB flash drive.
You might encounter this problem when running commands using your
USB flash drive.
If
you encounter this situation, verify the following items:
- That an satask_result.html file is
in the root directory on the USB flash drive.
If the file does not exist, then the following problems are possible:
- The USB flash drive is
not formatted with the correct file system type. Use any USB flash drive that
is formatted with FAT32 file system on its first partition; for example,
NTFS is not a supported type. Reformat the key or use a different
key.
- The USB port is not working. Try the key in the other USB port.
- The node is
not operational. Check the status using the light-emitting diodes
(LEDs).
- If there is a satask_result.html file,
check the first entry in the file. If there is no entry that matches
the time the USB flash drive was
used, it is possible that the USB port is not working or the node
is not operational. Check the node status using the LEDs.
- If there is a status output for the time the USB flash drive was
used, then the satask.txt file was not
found. Check that the file was named correctly. The satask.txt file
is automatically deleted after it has been processed.