Restoring the default settings for a QLogic HBA

You can use the Fast!UTIL menu to restore the default settings for a QLogic host bus adapter (HBA).

QLogic HBAs have built-in tools to change the HBA settings.

To restore the default settings for the QLogic HBA, complete the following steps.

  1. During system boot, press either <CTRL-Q> or <ALT-Q> to get the Fast!UTIL menu.
  2. If you have more than one Fibre Channel HBA installed, all the Fibre Channel HBAs are displayed. Scroll down to the adapter that you want. Press Enter.
  3. From the Fast!UTIL menu, scroll down and select Select Host Adapter.
  4. Scroll up and highlight Configuration Settings. Press Enter.
  5. From the Configuration Settings panel, select Restore Default Settings. You see the message Configuration settings modified. Select Save changes.
Parent topic: Managing hosts