lssnmpserver

Use the lssnmpserver command to return a concise list or a detailed view of SNMP servers that are configured on the clustered system (system).

Syntax

 lssnmpserver    [  -nohdr  ]   [  -delim  delimiter  ]   [ {  snmp_server_name  |  snmp_server_id  } ]

Parameters

-nohdr
(Optional) By default, headings are displayed for each column of data in a concise style view, and for each item of data in a detailed style view. The -nohdr parameter suppresses the display of these headings.
Note: If there is no data to be displayed, headings are not displayed.
-delimdelimiter
(Optional) By default in a concise view, all columns of data are space-separated. The width of each column is set to the maximum width of each item of data. In a detailed view, each item of data has its own row, and if the headers are displayed, the data is separated from the header by a space. The -delim parameter overrides this behavior. Valid input for the -delim parameter is a 1-byte character. If you enter -delim : on the command line, the colon character (:) separates all items of data in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data is separated from its header by the specified delimiter.
snmp_server_name | snmp_server_id
(Optional) Specifies the name or ID of an existing SNMP server that must be listed.

Description

Use this command to display a concise list or a detailed view of SNMP servers that are configured on the system.

A concise invocation example

lssnmpserver -delim :
The concise resulting output:
id:name:IP_address:error:warning:info:port:community
0:snmp0:192.135.60.4:on:on:on:78:public
1:newserver:192.136.70.7:on:off:off:250:newcommunity

A detailed invocation example

lssnmpserver snmp0
The detailed resulting output:
id 0
name snmp0
IP_address 192.135.60.4
error on
warning on
info on
port 78
community public