Configuring Fujitsu ETERNUS systems

Fujitsu ETERNUS systems can be configured for attachment to the system.

Supported models of the Fujitsu ETERNUS
The Lenovo Storage V series supports models of the Fujitsu ETERNUS series of systems.
Supported firmware levels for the Fujitsu ETERNUS
The Fujitsu ETERNUS must use a firmware level that is supported by the system.
User interfaces on the Fujitsu ETERNUS
Ensure that you are familiar with the user interface application that is used by the Fujitsu ETERNUS.
Configuring the Fujitsu ETERNUS
To enable attachment to the system, you must configure the Fujitsu ETERNUS. It is important that you use the correct settings to avoid data access problems.
Zoning configuration for the Fujitsu ETERNUS
If LUN mapping mode is used for a Fujitsu ETERNUS port, you must exclusively zone thesystem with this target port.
Migrating logical units from the Fujitsu ETERNUS to the system
You can use the standard migration procedure with the following restrictions:
Concurrent maintenance on the Fujitsu ETERNUS
Concurrent maintenance is the capability to complete I/O operations to a Fujitsu ETERNUS while simultaneously completing maintenance operations on it.
Advanced functions for the Fujitsu ETERNUS
The Fujitsu ETERNUS system provides several advanced copy functions. Do not use these advanced copy functions for storage that is managed by thesystem, even if the volume cache is disabled or set to read only.

Parent topic: External storage system configuration with Fibre Channel connections