Port settings for the Hitachi TagmaStore AMS 2000 family of systems

Port settings are configurable at the port level.

The settings listed in Hitachi TagmaStore AMS 2000 family of systems port settings supported by the Lenovo Storage V series apply to storage systems that are in a switch zone that contains Lenovo Storage V series nodes. If the system is shared between the Lenovo Storage V series clustered system and another host, you can configure with different settings than shown if both of the following conditions are true:

There are no available options with the scope of a single storage system.

Table 1. Hitachi TagmaStore AMS 2000 family of systems port settings supported by the Lenovo Storage V series
Option Default setting Lenovo Storage V series required setting
Port settings
Mapping mode On On
Port type Fibre Fibre
Reset LIP mode (signal) Off Off
Reset LIP mode (process) Off Off
LIP port all reset mode Off Off
Host group list
Host connection mode 1   Windows
HostGroupName "G000" "G000"
Middleware Unsupported Unsupported
Host system configuration
Platform   Windows
HostGroupName "G000" "G000"
Middleware Unsupported Unsupported
Host group information settings
HostGroupNumber 0 0
HostGroupName "G000" "G000"
Host group options
Host connection mode 1 Standard mode Standard mode
Host connection mode 2 Off Off
HP-UX mode Off Off
PSUE read reject mode Off Off
Mode parameters changed notification mode Off Off
NACA mode (AIX only) Off Off
Task management isolation mode Off Off
Unique reserve mode 1 Off Off
Port-ID conversion mode Off Off
Tru cluster mode Off Off
Product serial response mode Off Off
Same node name mode Off Off
CCHS mode Off Off
Inquiry serial number conversion mode Off Off
NOP-In suppress mode Off Off
S-VOL disable advanced mode Off Off
Discovery CHAP mode Off Off