Explanation
The code has detected more than one MAC address through
the connection, or the DHCP has given out more than one address. The
code thus believes there is a switch attached.
User Response
- Remove the cable from the technician port.
- (Optional) Disable additional network adapters on the laptop to
which it is to connected.
- Ensure DHCP is enabled on the network adapter.
- If this was not possible, manually set the IP to 192.168.0.2
- Connect a standard Ethernet cable between the network adapter
and the technician port.
- If this still does not work, reboot the node and repeat the above
steps.
- This event will auto-fix once either no connection or a valid
connection has been detected.